FileBeat下载与配置-for ELK_CodingPioneer_filebeat下载

网络 02-07 4379

FileBeat下载与配置-for ELK FileBeat下载FileBeat配置 for ELK

FileBeat下载

1、在本地浏览器输入地址：https://www.elastic.co/guide/en/beats/filebeat/index.html，如下图： 2、点击带current的链接FileBeat Reference:7.16（current），如下图： 3、点击Quick start:installation and configuration，如下图： 4、根据操作系统选择相应的下载链接，如下：

curl -L -O https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-7.16.2-linux-x86_64.tar.gz tar xzvf filebeat-7.16.2-linux-x86_64.tar.gz

5、在centos系统中粘贴执行，如下图：

FileBeat配置 for ELK

1、解压缩filebeat-7.16.2-linux-86_64.tar.gz

tar -xzvf filebeat-7.16.2-linux-86_64.tar.gz

2、修改filebeant-7.16.2-linux-86_64/filebeat.yml，内容如下：

###################### Filebeat Configuration Example ######################### # This file is an example configuration file highlighting only the most common # options. The filebeat.reference.yml file from the same directory contains all the # supported options with more comments. You can use it as a reference. # # You can find the full configuration reference here: # https://www.elastic.co/guide/en/beats/filebeat/index.html # For more available modules and options, please see the filebeat.reference.yml sample # configuration file. # ============================== Filebeat inputs =============================== filebeat.inputs: # Each - is an input. Most options can be set at the input level, so # you can use different inputs for various configurations. # Below are the input specific configurations. # filestream is an input for collecting log messages from files. - type: log # Change to true to enable this input configuration. enabled: true # Paths that should be crawled and fetched. Glob based paths. paths: - /opt/logs/application/*/*.log #- c:\programdata\elasticsearch\logs\* # Exclude lines. A list of regular expressions to match. It drops the lines that are # matching any regular expression from the list. exclude_lines: ['\sDEBUG\s\d'] # Include lines. A list of regular expressions to match. It exports the lines that are # matching any regular expression from the list. #include_lines: ['^ERR', '^WARN'] # Exclude files. A list of regular expressions to match. Filebeat drops the files that # are matching any regular expression from the list. By default, no files are dropped. #prospector.scanner.exclude_files: ['.gz$'] # Optional additional fields. These fields can be freely picked # to add additional information to the crawled log files for filtering fields: docType: sys-log project: wgms multiline: pattern: '^\[\S+:\S+:\d{2,}]' negate: true match: after - type: log paths: - /opt/logs/audit/*/*.log exclude_lines: ['\sDEBUG\s\d'] fields: docType: audit-log project: wgms multiline: pattern: '^\[\S+:\S+:\d{2,}]' negate: true match: after # ============================== Filebeat modules ============================== filebeat.config.modules: # Glob pattern for configuration loading path: ${path.config}/modules.d/*.yml # Set to true to enable config reloading reload.enabled: false # Period on which files under path should be checked for changes #reload.period: 10s # ======================= Elasticsearch template setting ======================= setup.template.settings: index.number_of_shards: 1 #index.codec: best_compression #_source.enabled: false # ================================== General =================================== # The name of the shipper that publishes the network data. It can be used to group # all the transactions sent by a single shipper in the web interface. #name: # The tags of the shipper are included in their own field with each # transaction published. #tags: ["service-X", "web-tier"] # Optional fields that you can specify to add additional information to the # output. #fields: # env: staging # ================================= Dashboards ================================= # These settings control loading the sample dashboards to the Kibana index. Loading # the dashboards is disabled by default and can be enabled either by setting the # options here or by using the `setup` command. #setup.dashboards.enabled: false # The URL from where to download the dashboards archive. By default this URL # has a value which is computed based on the Beat name and version. For released # versions, this URL points to the dashboard archive on the artifacts.elastic.co # website. #setup.dashboards.url: # =================================== Kibana =================================== # Starting with Beats version 6.0.0, the dashboards are loaded via the Kibana API. # This requires a Kibana endpoint configuration. setup.kibana: # Kibana Host # Scheme and port can be left out and will be set to the default (http and 5601) # In case you specify and additional path, the scheme is required: http://localhost:5601/path # IPv6 addresses should always be defined as: https://[2001:db8::1]:5601 #host: "localhost:5601" # Kibana Space ID # ID of the Kibana Space into which the dashboards should be loaded. By default, # the Default Space will be used. #space.id: # =============================== Elastic Cloud ================================ # These settings simplify using Filebeat with the Elastic Cloud (https://cloud.elastic.co/). # The cloud.id setting overwrites the `output.elasticsearch.hosts` and # `setup.kibana.host` options. # You can find the `cloud.id` in the Elastic Cloud web UI. #cloud.id: # The cloud.auth setting overwrites the `output.elasticsearch.username` and # `output.elasticsearch.password` settings. The format is `<user>:<pass>`. #cloud.auth: # ================================== Outputs =================================== # Configure what output to use when sending the data collected by the beat. # ---------------------------- Elasticsearch Output ---------------------------- #output.elasticsearch: # Array of hosts to connect to. #hosts: ["localhost:9200"] # Protocol - either `http` (default) or `https`. #protocol: "https" # Authentication credentials - either API key or username/password. #api_key: "id:api_key" #username: "elastic" #password: "changeme" # ------------------------------ Logstash Output ------------------------------- output.logstash: # The Logstash hosts hosts: ["121.36.91.30:5044"] bulk_max_size: 2048 # Optional SSL. By default is off. # List of root certificates for HTTPS server verifications #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"] # Certificate for SSL client authentication #ssl.certificate: "/etc/pki/client/cert.pem" # Client Certificate Key #ssl.key: "/etc/pki/client/cert.key" # ================================= Processors ================================= processors: - add_host_metadata: when.not.contains.tags: forwarded - add_cloud_metadata: ~ - add_docker_metadata: ~ - add_kubernetes_metadata: ~ # ================================== Logging =================================== # Sets log level. The default log level is info. # Available log levels are: error, warning, info, debug #logging.level: debug # At debug level, you can selectively enable logging only for some components. # To enable all selectors use ["*"]. Examples of other selectors are "beat", # "publisher", "service". #logging.selectors: ["*"] # ============================= X-Pack Monitoring ============================== # Filebeat can export internal metrics to a central Elasticsearch monitoring # cluster. This requires xpack monitoring to be enabled in Elasticsearch. The # reporting is disabled by default. # Set to true to enable the monitoring reporter. #monitoring.enabled: false # Sets the UUID of the Elasticsearch cluster under which monitoring data for this # Filebeat instance will appear in the Stack Monitoring UI. If output.elasticsearch # is enabled, the UUID is derived from the Elasticsearch cluster referenced by output.elasticsearch. #monitoring.cluster_uuid: # Uncomment to send the metrics to Elasticsearch. Most settings from the # Elasticsearch output are accepted here as well. # Note that the settings should point to your Elasticsearch *monitoring* cluster. # Any setting that is not set is automatically inherited from the Elasticsearch # output configuration, so if you have the Elasticsearch output configured such # that it is pointing to your Elasticsearch monitoring cluster, you can simply # uncomment the following line. #monitoring.elasticsearch: # ============================== Instrumentation =============================== # Instrumentation support for the filebeat. #instrumentation: # Set to true to enable instrumentation of filebeat. #enabled: false # Environment in which filebeat is running on (eg: staging, production, etc.) #environment: "" # APM Server hosts to report instrumentation results to. #hosts: # - http://localhost:8200 # API Key for the APM Server(s). # If api_key is set then secret_token will be ignored. #api_key: # Secret token for the APM Server(s). #secret_token: # ================================= Migration ================================== # This allows to enable 6.7 migration aliases #migration.6_to_7.enabled: true

3、运行filebeat 执行以下命令执行filebeat，如下：

nohup ./filebeat -e -c filebeat.yml &